1. Home
  2. PLM Software & Solution
  3. NX CAD | Siemens NX for Design Software
  4. Design Validation
  5. Design for Manufacturing

Design for Manufacturing

Design for Manufacturing: Make your designs as easily producible as possible.

Engineering change orders (ECOs), manufacturing faults, prices, and delays can all be considerably decreased with the use of design for manufacturing. You can uncover design concerns that are difficult, expensive, or impossible to make with the aid of high-definition 3D tools provided by DFMPro for NX, which automates and formalizes the design review process for manufacturability.

In order to highlight problem areas on the 3D model and alert designers to manufacturing issues throughout the design phase, DFMPro for NX is fully integrated with NX CAD tools.

Powerful capabilities in Design for Manufacturing enable you to create a unique solution. Read more about these features below.

HD3D Reporting Accelerates Validation

DFMPro for NX offers HD3D problem navigation, visual tagging, and information drill-down by utilising the tried-and-true NX Check-Mate validation architecture. These aid in a quick, efficient procedure for locating, comprehending, and resolving manufacturability problems.

Manufacturability Checks Using Best Practices

DFMPro for NX uses best-practice information to automate and codify the design review process for manufacturability. It quickens the process of identifying issues and proposes solutions based on manuals of best practises and a knowledge base. By using DFMPro for NX to implement standard manufacturability checks, you may catch errors early in the design process and make sure that previous errors are not repeated.

Featured NX CAD Resources

NX What is New – June 2022 Design Part 1
Subscribe

Get the latest tips, software updates and promos.